<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"><channel><title>Pneumatics Practice Notes</title><description>Independent notes on pneumatics, compressed air and machine motion for packaging lines, with a section on reading older component documents.</description><link>https://rexrothpneumatics.com/</link><item><title>Air preparation questions for a packaging line</title><link>https://rexrothpneumatics.com/compressed-air/air-preparation-for-packaging-lines/</link><guid isPermaLink="true">https://rexrothpneumatics.com/compressed-air/air-preparation-for-packaging-lines/</guid><description>How ISO 8573-1:2010 writes particle, water and oil classes, and why a sample after the hose can fail a class that passed at the filter.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Questions to write down before you size a cylinder</title><link>https://rexrothpneumatics.com/pneumatics/cylinder-selection-questions/</link><guid isPermaLink="true">https://rexrothpneumatics.com/pneumatics/cylinder-selection-questions/</guid><description>Load, port pressure, stroke and mount, taken from a published cylinder guide. The worked numbers are that guide&apos;s example, not a test by this site.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate></item><item><title>A blank plan for a compressed-air leak survey</title><link>https://rexrothpneumatics.com/compressed-air/leakage-survey-plan/</link><guid isPermaLink="true">https://rexrothpneumatics.com/compressed-air/leakage-survey-plan/</guid><description>Tag, record, repair and check again. Flow rates are quoted from a 2004 public tip sheet. The sheet on this page stays blank until you measure.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate></item><item><title>When a packaging motion is air, and when it is a servo</title><link>https://rexrothpneumatics.com/packaging-applications/pneumatic-vs-servo-motion/</link><guid isPermaLink="true">https://rexrothpneumatics.com/packaging-applications/pneumatic-vs-servo-motion/</guid><description>A task comparison of an air cylinder and an electric actuator, using two public articles. Neither one is treated as a replacement for the other.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate></item><item><title>How to read an old pneumatics part number</title><link>https://rexrothpneumatics.com/legacy-documentation/reading-legacy-part-numbers/</link><guid isPermaLink="true">https://rexrothpneumatics.com/legacy-documentation/reading-legacy-part-numbers/</guid><description>Match a number to a document you hold, and record the title, date and standard printed on it. This site does not decode a catalog or name a replacement.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate></item><item><title>Checklist from a bad container to the reject ram</title><link>https://rexrothpneumatics.com/packaging-applications/reject-actuator-checklist/</link><guid isPermaLink="true">https://rexrothpneumatics.com/packaging-applications/reject-actuator-checklist/</guid><description>Questions that tie a fault signal to the container the ram pushes off, using one published inspection station as the example, not a test by this site.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate></item></channel></rss>