Reject actuator checklist
Pneumatics Practice Notes
Blank on purpose. The example station on the site page is Accutek Packaging's Inspection-Rejection Station note dated 25 August 2018. Fill this sheet from your line. This file is not a test by this site.

Line: ____________________
Date: ____________________
Container pitch measured: ____________________
Containers between last sensor and ram: ____________________

Question | Answer from this line
Which faults reject, and which faults only alarm? |
How many containers sit between the sensor and the ram? |
Does the tracker keep that count through a stop and a start? |
What happens to the next good container if the ram stays out? |
Who confirms the rejected container left the belt, and where is that written? |
Air pressure at the ram's work port, if you measured it: |

Do not copy the published "up to three containers" or "200 containers a minute" onto this sheet unless you measured those figures on this line.